ALTERNATIVE FOR EARTH MOVING MACHINES
The hardened steel bushing is the standard bushing for earth moving machines. Thanks to a low friction coefficient, it makes the bushing resistant to wear and seizure.
Thanks to the use of a special steel with controlled chemistry yoke, our bushings guarantee a high performance (the standard for the case hardness depth- CHD- of the end product after the grinding is 0.8-1.0 mm and the hardness- HRC- is 58-62.)
Our bushings are high-performance and long-lasting as a result of the best choice of raw materials and heat treatments.
On stock we have more than 3.000 types of hardened steel bushings (size internal diameter ø20 up to over 250mm;) Furthermore, we offer other types of steel bushings (amongst which steel cut bushings.)
STEEL HARDENED SMOOTH BUSHINGS
They are the most basic pieces, smooth both on the inside and out.
STEEL HARDENED BUSHINGS WITH INTERNAL LUBRIFICATION
The internal structure of these bushing lets the oil flow continuously.
Amongst these bushings, you can find the ones with internal spiral groove and the ones with central or side groove.
STEEL HARDENED BUSHINGS WITH INTERNAL AND EXTERNAL LUBRIFICATION
Per permettere, oltre alla lubrificazione interna, anche un ingrassamento esterno, le boccole possono essere ulteriormente dotate di gola esterna e/o di fori.
Sono inoltre presenti varianti che combinano alla gola e fori anche la ragnatura interna per garantire la più completa lubrificazione.
STELL HARDENED FLANGED BUSHINGS
These bushings come with a flange (or collar) and are mainly used in the joints of backhoes. We offer smooth bushings, with internal and/or external lubrication.
INNER AND OUTER TENSION STEEL BUSHINGS
These bushings are made of tempered and quenched steel, they are usually smooth on the inside and out and have a straight vertical cut. Since these bushings are quite flexible and resistant, they can be used even in case of hard work and high surface tension.
Contact us right now!